Mailport July 2010 Issue

Mailport: July 2010

Galley Blenders

Regarding onboard blenders like the one PS reviewed in the June 2010 Chandlery: A quarter-inch socket drive adapter in an 18-volt drill mates perfectly with the eight-point drive socket on an ordinary Oster blender (www.oster.com). Leave the heavy base ashore and put the cordless drill to double duty. If you want a tidier solution, the Boatblender (www.boatblender.com) is a $30 kit that does away with the lid, using the same quarter-inch drive.

 

Peter Tollini

Via e-mail

Next: Rust Remover

Comments (0)

Be the first to comment on this post using the section below.

New to Practical Sailor?
Register for Free!

Already Registered?
Log In