PS Advisor January 2014 Issue

Boom Furler Test is Overdue

Does Southern Spars’ approach set new high-bar?

I was re-reading your review of in-boom furlers (PS, October 2001) in which you compared five different manufacturers’ products. You did not review the unit made by Southern Spars, which is a spinoff of the Leisure Furl system by Forespar, but I wonder whether you have ever reviewed and compared the Southern Spars in-boom roller furling system?

Ford Ebner
Synapse, Leopard 48 catamaran

New Zealand-based Southern Spars ( is on a bit of a tear. In the last five years, the company has acquired fellow-New Zealand company Martin Spars. It also acquired Aramid Rigging in Portsmouth, R.I., to form the new company Composite Rigging. Southern Spars is also represented by Rig Pro in Rhode Island.

Top photo by David Liscio

Preventing a sail from bunching up at the front of a furling boom is a challenge. Achieving the perfect “boat-show” furl (left) isn’t quite so easy at sea.

Until recently, Southern Spars has focused primarily on custom, hydraulic furling systems for big boats in the 70-foot-plus size. However, at the most recent Marine Equipment Trade Show (METS) in Amsterdam, the company unveiled a new line of small-boat boom furlers. The first line—booms 15 feet or shorter—is now available for ordering. Booms 15 to 24 feet long will be available in April 2014, and those in 24-foot to 36-foot lengths will follow.

The new Coastal Furl system combines features found in the furling systems that Martin produced, as well as those that Southern Spars developed over the years. The open-top boom and internal mandrel (around which the sail furls) are carbon fiber. The manual line-drive system is at the front of the boom, connected to the mandrel with an articulating universal joint that allows the boom to move freely. The top of the boom is wide open to prevent jamming and has an integral sail cover. One of the key features is the ability to install the new system without unstepping the mast. Southern Spars also offers an optional carbon-fiber gas vang to help keep the boom at the correct angle for furling.

Although we’ve not tested the new boom furlers, we’ve been generally impressed with equipment from Southern Spars. The gear needs to be rugged and reliable in order to survive with the local sailing conditions in New Zealand, and the government-supported sailing industry benefits from a pool of talented engineers.

While we prefer boom furling over in-mast furling, we often recall a quote from that first test of boom furlers: “Why would I need a $20,000 sail cover?” That said, the expansive fat-head mainsails and high coachroofs on modern catamarans make furling booms a very attractive option.

Two concerns we have (apart from the cost) with any boom-furling system for your boat: The boom required to swallow your sail is going to be heavy and bulky (although carbon fiber will help with this). We are also skeptical that the new products have resolved all the issues with furling booms that we raised in our last test. Among the challenges: dealing with batten compression at the mast, preventing the sail from jamming as the sail comes down, and ensuring the boom is at the correct angle for the sail to furl properly.

We will be revisiting furling booms this year and will be sure to include Southern Spars’ new system.

Comments (2)

Doing fine with the Forespar Leisure Furl. We're on our second sysem (new to us boat). Has worked well with no probelms in smooth and severe conditions, with the basic system on a smaller (36" boat, and now with power on a 52. We've used the larger system without power, and it was fine.d

Posted by: Unknown | March 2, 2015 2:41 PM    Report this comment

Boom curlers are good.I have one mounted on my Bristol 33 and have sailed from The Republic of Panama around the west end of Cuba with pleasure and few problems.

Our boom furler is a Schaefer.and it has performed well for us.It weighs more than I woul like,but we are satisfied with it.

Don't buy one without factoring in the cost of an electric winch.(a Milwaukee 18v 1/2 inch angle drill motor with a Winchbit works for us)without an electric assist ,up and down is too much of a struggle and takes too long.Schaefer should say something about that.A good electric winch runs $5000.00 and up

Our run to from Panama toProvidencia was easy with SW +- 10-15 knots and 2 foot swell Same conditions to Grand Cayman and Fla.Heavier weather may be another story.

Posted by: Robert C | January 29, 2015 10:36 AM    Report this comment

New to Practical Sailor?
Register for Free!

Already Registered?
Log In