Mailport: April 2011

Dinghy Field ReportWi-Fi SolutionsCreative Hose StorageSoap on a BoatEco AntifoulingFurlers & Rig pumpingVarnish field ReportLaser NewsElectric ToiletsPersonal LibertyMore ‘Big Brother’Streamlight HeadlightCorrection

0
Caribe L10 Hose storageThe Greatland Rescue Laser

hotos courtesy of Peter Szamer and Greatland LaserPhotos courtesy of Peter Szamer and Greatland Laser

288

In regard to the reader letter requesting informed opinions on choosing a dinghy type (PS Mailport, March 2011): I’ve owned three so far. We started with a fold-up inflatable (plywood floor) and a 5-horsepower outboard. It lasted most of our first year of cruising from Lake Superior to the Bahamas. Fold-up inflatables are not very dry in comparison to actual rigid inflatable boats (RIBs) because their tubes are smaller in diameter. Fold-up inflatables also will not tolerate years of rough service in choppy seas.

Our second dinghy was a RIB with an aluminum floor. It was lighter than the fold up, handled great with a 15-horsepower Yamaha, and it kept us, our laundry, and our groceries drier than the roll-up did. That particular model had a design flaw, however; RIBs must be able to flex, and the aluminum floor had welds that broke instead of flexing.

Our third and current dinghy is a Caribe RIB, which we are very pleased with. Many cruisers have RIBs with big outboards because we use them for everything! Could you carry four passengers in a hard dinghy? Possibly even get the dink up on a plane and get across a harbor safely and quickly should the need arise? Think of using a hard rowing dinghy with a low-horsepower outboard to get your cruising boat out of trouble should your main engine fail and you need to use the dink as a tug. Better hope there’s not much current. You’ll start to get the feeling that having one of those too-big dinghies is more of a necessity than a luxury.

Scott Nicholls
Saltine

Thanks for your dinghy field report. We would just like to add that one drawback of larger dinghies is stowing them underway. Davits work well for coastal cruising, but not ocean passagemaking. Be sure you have the onboard space to stow a dinghy properly. We appreciate everyone who’s written in with their dinghy stories, and we apologize to those who went looking for the dinghy survey on www.practical-sailor.com. The MIA survey was a result of our ongoing effort to move to our new, improved website (launch expected this month). Until the survey is up and running, you can e-mail your comments to the editor at mailtp:practicalsailor@belvoirpubs.com.

I’ve followed your recent articles (April 2010, January 2011) on boosting Wi-Fi access using higher powered systems. I’d like to add to the mix the system I installed in spring 2010. Greg Gonyea at WiFi Antenna Easy (www.wifiantennaEZ.com) has put together a POE system that provides the antenna, amplifier, mounting hardware, Cat 5 cable, 12-volt power module, and software. WiFi Antenna Easy also offers an optional 12-volt wireless router that adds wireless capability for multiple users and eliminates the need for connecting a Cat 5 cable from the system to your laptop.

We installed the system in May and used it on a two-week cruise from the Chesapeake to southern New England. We were able to find and connect to an open router in most harbors with excellent results. It is also a real asset in our home marina, where the connection using the built in Wi-Fi in our laptops was always tenuous. For the rest of the season, performance continued to be excellent.

I had a few issues during the initial start-up related to software I had installed on my laptop, but Greg provided terrific support, taking the time to help me sort the problems out.

WiFi Antenna Easy offers several models. I bought the higher-power AS-2 system. At $254.50 for the AS-2, the price is reasonably

competitive with the do-it-yourself system you recently profiled. I think WiFi Antenna Easy offers a great option that is not as well-known as some of the systems you have reviewed.

Rex Noel
Xtasea
Chesapeake Bay

 

Caribe L10 Hose storageThe Greatland Rescue Laser

hotos courtesy of Peter Szamer and Greatland LaserPhotos courtesy of Peter Szamer and Greatland Laser

288

I want to share a unique storage system for power cords and hoses that I’ve found and I think my fellow readers will appreciate. (See photo above.) I use two covers for spare tires kept on the rear of SUVs. Using two works best (put hoses/cords in one and cover with the second). If their slits are aligned, a useful handhold results.

Mike Zelman
Ricofee, 1986 Pearson 28
Islamorada, Fla.

 

Your response to Don Grass’ letter (PS Mailport, February 2011) about an upcoming article on soaps made me write. You mentioned Dr. Bronner’s and Savon de Mer; I hope you will also include Sierra Dawn Campsuds (www.sierradawn.com) in your review. That is what I use camping, traveling, and boating. It is biodegradable, works in cold, salt, and hard water, and works on dishes, clothes, hair, and the body. It’s available on www.amazon.com for $10/16 ounces. I’m interested to see how it compares.

Lisa Falk
Via e-mail

We’ll be sure to add it to the test lineup. We welcome any other recommendations for onboard bathing, dish washing, and laundry soaps, or methods that work. You can e-mail them to the editor at practicalsailor@belvoirpubs.com.

 

 

Your excellent, but diplomatically worded editorial, “The Pitfalls of Eco-nice Antifouling” (March 2011) points out the effects of the now quasi-religious nature of the so-called environmental movement.

When I started out in the marine coatings industry in 1965, at a major brand company, we developed a tropical antifouling coating that would last seven years; no haulouts required. Nowadays, slower ocean-going vessels must be hauled out every two years. According to the laws of diminishing return, and this environmental madness, we will eventually end up with naked hulls and no marine traffic!

Overuse of tetrabutyl tin (TBT) antifouling by amateur boaters, especially in freshwater lakes, was criminally inappropriate. However, modern chemistry is the solution, not the problem. Biocides and copper are not the enemy when used correctly.

Michael R. Bingham
Deer Park, Texasz
Via e-mail

 

Caribe L10 Hose storageThe Greatland Rescue Laser

hotos courtesy of Peter Szamer and Greatland LaserPhotos courtesy of Peter Szamer and Greatland Laser

288

How well are the relatively new double-headstay rigs doing in the field? By double-headstay rig, I mean the designs with one stay forward with roller-furled light-air sails and another stay directly aft with the roller-furled working genoa. I did a small computational fluid dynamic (CFD) analysis of such a setup after witnessing a case of rig pumping in relatively light wind. (The results were published in the Nov. 18, 2010 “Machine Design.”)

One possible explanation might be as follows: The double-headstay designs were meant for larger sailboats, 46 feet and larger, that allowed for a good separation distance between the two headstays. As smaller boats added this rig, the separation distance got smaller. This allows for fluid flow from the forward furled sail to interact with the trailing furled sail in situations such as sitting at anchor. At speeds of 0.16 to 80 knots, the wind dips inward in an unsteady pattern 18 to 28 inches behind a 6- to 7-inch-diameter furled sail. Have any other readers witnessed similar instances of rig oscillations or pumping?

Fred and Barbara Jensen
Viator, Cabo Rico 34
Sandusky, Ohio

That’s an interesting theory, and a timely one as this issue (pages 12-16) includes a review of furlers for light-air sails that were tested on a 41-foot boat. We’ve not had any reports from readers or Practical Sailor testers of rig oscillation issues related to the double-furler setup. Most of the feedback we’ve gotten from boat owners with two mounted furlers has been positive, touting the added versatility of having a light-air sail and a working genny at the ready. Most also have the light-air sail furler mounted on a sprit, which maximizes its separation from the genny furler. In regards to your report, there are some factors that weren’t covered that we’d be curious to know about. For instance: how loose was the rig, was it an inline set of spreaders and shrouds with no running backstays/checkstays, and did the rig continue to vibrate on the next windy day after the owner removed one of the furled sails and furling gear?

 

I’m an avid reader of Practical Sailor and use your articles to help me choose products for both sailing and maintenance of my Gulfstar 37. I paid special attention to recent articles on wood finishing (January 2011). Based upon your past reviews, I opted to use Ace hardware varnish. It’s worked great on the teak of my Gulfstar 37.

Caribe L10 Hose storageThe Greatland Rescue Laser

hotos courtesy of Peter Szamer and Greatland LaserPhotos courtesy of Peter Szamer and Greatland Laser

288

The following letter was written by Jim O’Meara, former Alaskan bush pilot and the inventor of the Greatland Rescue Laser and Green Rescue Flare, which we reviewed in the March 2011 issue. Since that review, there has been some legislative action regarding use of the laser to signal aircraft. Already signed by the House and Senate, the new bill is an amendment to an existing law that prohibited users from pointing laser-pointers at aircraft. The amendment makes it clear that individuals can use “a laser emergency signaling device to send an emergency distress signal.”

You might have thought about getting an emergency laser signaling device but were hesitant because of all the hype in the news about pilots being blinded and users getting arrested. You can now shine on with confidence: A law soon to be signed by the president allows emergency laser signaling devices to be aimed at aircraft in an emergency. In all probability, there will be some restriction on power levels (5mW), so the rescuer isn’t blinded.

Now that using the lasers is approved, one can choose to leave the pyrotechnics in the bag, especially if a positional alert device like a PLB or an EPIRB is activated. The laser can be used to signal passing boats, onshore residences, and passing aircraft. Aircraft are required to report any laser sighting.

Jim O’Meara
President, Greatland Laser
Inventor, Rescue Laser Flare
www.greatlandlaser.com

 

Caribe L10 Hose storageThe Greatland Rescue Laser

hotos courtesy of Peter Szamer and Greatland LaserPhotos courtesy of Peter Szamer and Greatland Laser

288

Sea Era aboard

I read with interest the electric-flush toilet tests (February and March 2011), since we have the Raritan Sea Era aboard. As you noted, raw-water flushing is a major contributor to toilet odors, so we prefer to flush with municipally treated onboard pressurized water.

Aboard our old boat, with a conventional manual head, we simply directed water from our handheld shower head into the bowl as a source of clean water, but that doesn’t seem like it would flush water where it needs to be with an electric head, to avoid running the Sea Era’s pump dry.

It appears that some heads are designed for pressurized water input. Is there a risk of contaminating potable water from connecting these systems? How do the heads designed for pressurized freshwater flushing connect to the water supply?

Bob Fine
Second Wind, Catalina 350
Winthrop Harbor, Illinois

Any electric marine toilet needs either an input pump pulling in raw water (lake or sea) or a connection to on-board pressurized fresh water through a “solenoid valve.” Some boats have both, which work one at a time, through a Y valve. The output or macerator pump needs adequate swishing water to do its job.

Pressurized water is fed through a normally closed solenoid valve. The valve is opened when electricity is applied. This valve keeps any would-be back-flow of toilet water out of the freshwater system. Any dealer that sells electric marine toilets also sells various size solenoid valves for use with pressurized water for flushing. The solenoid valve would replace the Sea Era’s “input” pump.

 

Kudos for the brave article about the possible impact of AIS (“Big Brother on the Water,” February 2011). In the present environment, it takes courage to speak out on behalf of personal liberty. And anyone with a pleasure boat who has been boarded by the Coast Guard does—as the author said—take a warmer view of the need for honoring the search-and-seizure provision of the Constitution. I expect the author will be roundly condemned by the many who are all too willing to “give up essential liberty” for false security.

Tom Hagoort
Peripatetic, Bristol 41.1
Hilton Head Island, S.C.
and Shelter Island, N.Y.

 

I take issue with the February 2011 article “Big Brother on the Water.” I retired as an international airline pilot less than a year ago after being an aviator for 45 years. When I began flying, there was no such thing as the Traffic Collision Avoidance System (TCAS). Today, mid-air collisions are extremely rare thanks to TCAS. It’s true that we have traded the “right” to attempt to occupy the same time and space as another aircraft for a loss of privacy but that seems to me a fair trade.

As sailor for 48 years, I crewed on a sailboat from Fort Lauderdale, Fla., to New York City several years ago. We arrived at The Battery in Manhattan with no acknowledgement by any authorities. Maybe it was because we were only blocks from the former World Trade Center, but I felt uncomfortable that nobody knew who we were or from whence we came. Perhaps it is my airline background, but I believe such unfettered freedom is out of place when there are radical groups bent on doing us harm.

Les Fuchs
Atlanta, Ga.
Via e-mail

After reading your Chandlery article on the Streamlight Sidewinder (March 2011), I thought others might want to take a look at the Streamlight Survivor LED flashlight. This is a right-angle headlamp designed for firefighters, so it’s extremely rugged and it throws a very bright, narrowly focused beam. This is important to firefighters to avoid blinding light scatter in smoke, and increases its utility to sailors in fog. The less-expensive version runs on four AA batteries. I have an earlier version with a Luxeon LED, but the new ones have the C4 LED, which should be even brighter.

Chip Stratton|
Road Less Traveled
Worton Creek, Md.

The article on used-gear stores in the February 2011 issue listed an incorrect phone number for the Sailorman store in Fort Lauderdale. The correct number is 954/522-6716.

 

Where Credit is Due
Darrell Nicholson
Practical Sailor has been independently testing and reporting on sailboats and sailing gear for more than 50 years. Supported entirely by subscribers, Practical Sailor accepts no advertising. Its independent tests are carried out by experienced sailors and marine industry professionals dedicated to providing objective evaluation and reporting about boats, gear, and the skills required to cross oceans. Practical Sailor is edited by Darrell Nicholson, a long-time liveaboard sailor and trans-Pacific cruiser who has been director of Belvoir Media Group's marine division since 2005. He holds a U.S. Coast Guard 100-ton Master license, has logged tens of thousands of miles in three oceans, and has skippered everything from pilot boats to day charter cats. His weekly blog Inside Practical Sailor offers an inside look at current research and gear tests at Practical Sailor, while his award-winning column,"Rhumb Lines," tracks boating trends and reflects upon the sailing life. He sails a Sparkman & Stephens-designed Yankee 30 out of St. Petersburg, Florida. You can reach him by email at practicalsailor@belvoir.com.