Features January 2018 Issue

Test Compares Insulation Below Waterline

First, we set up an R-value test rig, exposing sample materials to a temperature difference and measuring the difference in heat flow (see adjacent photo). The main thing to take away from this is that small areas of very poor insulationówindows or non-cored laminateówill benefit best from insulation.

R-value of each insulation material taped to the hull
Testers calculated the R-value of each insulation material taped to the hull (left) and also tested long term service on the test boat.

We then tested a variety of materials on the hull and air conditioning ducts for both surface sweating and condensation underneath. We placed 10-inch squares of a variety of materials against a non-cored FRP hull resting in 34-45 F water for several months. Some we sealed to the hull with tape, some were simply pressed against the hull, and some were self-adhesive.

Although this is not a live-aboard boat, we did make a point of spending at least one night per week on the boat. We turned the dehumidifier off, and closed all ventilation. The relative humidity hovered between 55-65 percent, and the temperature ranged from ambient to 72F.

Comments (0)

Be the first to comment on this post using the section below.

New to Practical Sailor?
Register for Free!

Already Registered?
Log In