Carving Out Cores

1

A modified roofing nail is perhaps the most versatile tool for removing core when sealing fastener holes. It is much easier to control than bent nails or cut-down allen keys, which can jump around as they spin. Core removal is more uniform. Wood chips are finer and easier to remove. It is faster than a Dremel cutter and undercuts twice as far.

Fabrication is easy. Clamp a nail in a vice, slot the head into quarters with a hacksaw or Dremel wheel, and bend the tabs in alternating directions. Each nail is good for many, many holes. Make several if you like, from different size nails, but we like roofing nails.

Darrell Nicholson
Practical Sailor has been independently testing and reporting on sailboats and sailing gear for more than 50 years. Supported entirely by subscribers, Practical Sailor accepts no advertising. Its independent tests are carried out by experienced sailors and marine industry professionals dedicated to providing objective evaluation and reporting about boats, gear, and the skills required to cross oceans. Practical Sailor is edited by Darrell Nicholson, a long-time liveaboard sailor and trans-Pacific cruiser who has been director of Belvoir Media Group's marine division since 2005. He holds a U.S. Coast Guard 100-ton Master license, has logged tens of thousands of miles in three oceans, and has skippered everything from pilot boats to day charter cats. His weekly blog Inside Practical Sailor offers an inside look at current research and gear tests at Practical Sailor, while his award-winning column,"Rhumb Lines," tracks boating trends and reflects upon the sailing life. He sails a Sparkman & Stephens-designed Yankee 30 out of St. Petersburg, Florida. You can reach him by email at practicalsailor@belvoir.com.

1 COMMENT