Features March 2007 Issue

Tool Tips

When it takes longer to find the right tool for the job than to actually complete the job, consider creating your own “doctor’s bag” of boat tools. Veteran cruiser and handy-man Evans Starzinger gives advice on taming your toolbox.

Having the right tool makes every boat maintenance or repair job that much easier. Having it handy makes an even bigger difference. With that in mind, PS tester Evans Starzinger decided to develop one small tool bag that would cover 85 percent of the jobs by itself. After two years of tinkering with the contents, he settled on a small tool bag that seems to fit the bill. It has four basic categories of tools: standard mechanical tools (screwdrivers and wrenches), electrical, sewing, and consumables. The tool bag was selected to be compact, easy to carry and stow, while just big enough to fit the necessary tools.

***

 

Toolbox

The oft-repeated chestnut that world cruising is fixing your boat in a series of exotic ports is true, and it implies that a cruising boat should carry a lot of tools to do all that fixing. Over the years, my partner, Beth, and I have added more and more tools to our stash. It got to the point that I had the tools sorted by type into six large Rubbermaid tool boxes and a four-drawer tool chest. I then discovered that to do almost any project required unstrapping and opening at least half of the tool boxes. This created quite a mess, a big cleanup, and a big restowing job when my project was completed. I decided to develop one small tool bag that would cover 85 percent of the jobs by itself and most of the other 15 percent hopefully by opening only one of the larger tool boxes.

After two years of tinkering with the contents, I have settled on a small tool bag that seems to fit the bill. It has four basic categories of tools: standard mechanical tools (screwdrivers and wrenches), electrical, sewing, and consumables. The tool bag was selected to be compact, easy to carry and stow, while just big enough to fit the necessary tools.

Standard
Mechanical Tools

Boat Repair Equipment
Boat ownership requires a bevy of tools that would make Bob Vila jealous. We suggest keeping your most-used tools in their very own “fix-it” bag. While the tools you use less frequently can be stowed out of the way,this “kitchen-drawer” toolbag will allow you access to what you need for smaller tasks without having to dig through those endless bins of DIY utensils. Pictured at left is an example of tools you should include in your standard mechanical bag.

This category consists of a very conventional collection of tools. I did not want to carry a full set of both metric and standard socket wrenches, so the only real learning point was to figure out exactly which box wrenches were needed to fit the bolts on our boat,

Hawk. Our hose clamps have 7-millimeter nuts, half-inch and 13 millimeter fit the adjustment screws on our two alternators (and also the mainsail batten tension adjustment bolts), 7/16 inch fits the Harken batt cars, and 12 millimeter fits the bleed screw on the engine. The hex wrenches are the only tools that seem to rust, so I keep them in a Ziplock bag sprayed with WD-40. The following tools fall into this category:

Largest flat-blade screwdriver that will fit in the bag, also used as pry bar

Two multi-blade screwdrivers (large ratchet unit and smaller one with specialty blades)

Three small jewelers’ screwdrivers two flat blades (small and tiny) and one Phillips

Eight ratcheting box wrenches two 7/16 inch, two half-inch, and one each of 9/16 inch,
7 millimeter, 12 millimeter,
and 13 millimeter

An adjustable crescent wrench

Two vice grips (needle nose and standard)

Two sets of hex wrenches (metric and standard)

Pipe wrench

Filter wrench (style with adjustable chain)

Lineman’s pliers with
heavy-duty wire cutters

Exacto knife

Heavy-duty scissors

Electrical Tools

Electrical Tools
Investing in high-quality electrical tools is well worth it, if you like trouble-free connection making.

Through our own experiences and discussions with electrical component experts, we have been convinced that a good crimp connection is the way to go rather than soldering. The key is that it must be a GOOD crimp, which is almost impossible to make with the inexpensive "auto crimper kits." It requires a high-quality ratchet crimper that will make a perfect, watertight crimp every time. (Practical Sailor’s favorite crimper is the Klein 1005, Practical Sailor Aug. 15. 2003.) I also use a pair of specialty wire strippers that make a perfect strip to fit the crimp terminals. Ancor (www.ancorproducts.com) makes a quality stripper (a Practical Sailor favorite in the 2003 review) and crimper. They run about $60 each, but are worth it for perfectly trouble-free connections. I keep the multimeter in a Ziplock bag to prevent the display from being scratched by the other tools. Our electrical toolkit includes:

Digital multimeter

Ratchet crimper

Wire stripper

Wire cutters

Sewing Tools

Toolkit
Your consumables toolkit should include frequently used items like cable ties, Loctite, and tape.

The thread needs to be strong and UV resistant. The Goretex thread (available from Sailrite, www.sailrite.com) meets that bill, as does waxed dental floss, which also holds a knot better. The small needle-nose pliers and vice grips are used to put a needle through thick cloth. We carry the following for sewing needs:

Heavy sailmaker needles

Normal household sewing needles

Goretex sewing thread

Waxed dental floss

Heavy, polyester waxed whipping twine

Small scissors

Needle-nosed pliers

Small vice grips

Lighter

Sailing knife

Fid set

Consumables

We use wire ties on most of our shackles to prevent the pins from vibrating loose. But on two of the shackles (mainsail tack and anchor), we found that the wire ties kept breaking, so we now use stainless wire to seize the pins on those. (Some Practical Sailor editors prefer monel seizing wire over stainless wire and plastic cable ties, which are affected by UV rays.) WD-40 is not much of a lubricant, but it is a terrific cleaning fluid.

Sailors? Sewing Tools
Not your grandma’s sewing kit : Sailors’ sewing tools including UV-resistant thread must be able to handle heavy-duty projects.

 

While we have many special-purpose lubricants and adhesives, we use LanoCote www.defender.com) as our general purpose stainless-fastener lubricant, blue Loctite (www.loctite.com) as the standard thread lock, and super glue and a two-part epoxy putty as the normal adhesives. In our consumables toolkit you’ll find:

A small assortment of crimps, terminals, and heat-shrink tubing

Wire ties

Stainless-steel (or monel) seizing wire (to tie shackles closed)

A small jar of LanoCote

WD-40

Electrical tape

Rigging tape

Blue Loctite

Silicone caulk

Super glue

Epoxy

Conclusions

This single, small tool kit, along with a DeWalt (www.dewalt.com) or Makita (www.makita.com) cordless drill and carbide bits, allow me to do most common jobs without unpacking any of our big tool boxes.

Comments (1)

Excellent. Just what I was looking for! Love you guys!
Thanks

Posted by: william w | May 2, 2013 6:22 PM    Report this comment

New to Practical Sailor?
Register for Free!

Already Registered?
Log In