Sails, Rigging & Deck Gear

Sail performance is directly affected by the type and condition of your halyards. Upgrading your halyards to a low-stretch fiber helps ensure youre getting the sails full power, and it can add life your sails. After testing a sampling of lines from New England Ropes, Novatech Braids, Samson Rope, and Yale Cordage, Practical Sailor found that line stretch decreases significantly as cost increases. And while the very-low- to no-stretch high-tech lines often come with through-the-roof prices, there are low-stretch halyard options available for the budget-minded sailor.This article offers a line cost vs. line stretch analysis and an overview of the fibers available. UV resistance and other factors like abrasion resistance and ease of splicing will be the subject of future tests on these halyard materials.

Practical Sailors 12-month results in the mooring chain test gave us no reason to change our previous ratings. Our vote still is for the Acco grade-30 proof coil. Its the best chain for the dollar. If youre made of money, you could set up your mooring with the Suncor stainless. But the dark side of stainless is that after years of cyclical loading, it can break without warning. Corrosion is just one of the factors affecting a chains integrity, and until we start putting these chains under load, and ultimately, testing them for breaking strength, many questions will remain unanswered.

The micro-wind turbines assembled for this comparison include the KISS High Output Wind Generator, the Rutland 913, the Superwind 350, the Ampair 100, and a prototype of the Air Breeze. The four-day test period brought a good mix of light- and strong-wind days, so testers were able to review wind generator output in a variety of conditions. Wind speeds for the 4-day period averaged 12.6 knots, with two blustery days, so were not surprised the high-output, three-bladed wind generators topped the five-bladed ones overall.

In our July 2005 issue, we reviewed an innovative Mooring Bridle Plate from Colligo Engineering and Design, a company located in Mesa, Ariz. Now the folks at Colligo Marine have come up with a new product, one designed to help boaters lay out their storm anchoring system when prepping for the big blow. The Hurricane Anchor System provides an easy, secure method of attaching three anchors to your vessel, utilizing two or three mooring bridles (depending on whether you purchase the mono- or multihull model) while reducing the possibility of rode fouling by allowing the boat to swivel at anchor.

When cruising sailors think of renewable energy, their thoughts immediately turn to the wind. When selecting a marine wind generator for your boat, several factors must be taken into account, and separating fact from fiction is hard. Claimed output data for specific units can vary greatly from real-world performance. In part one of our series we introduce the six units we test, the Air Breeze from Southwest Wind Power, the Superwind SW250, the KISS High Output, the Ampair 100, and the Rutland 913. The selection presents a good cross-section of micro wind turbines available today and allows us to make some conclusions regarding the best wind generator for particular marine applications.

Whatever jackline system is used, it should be supplemented with fixed clip-in points in the cockpit, at the helm, and around the mast-wherever crew members work for extended periods. International Sailing Federation recommendations require that two-thirds of the crew be able to be simultaneously clipped on without depending on jacklines. Our top choice is a low-stretch Dyneema or Spectra jackline custom made by a professional with loops bartacked in place. For those on a budget, low-stretch polyester jacklines like those made by one of our recommended suppliers will suffice. In either case, routine inspection for wear and UV damage is imperative.

What kind of glue do you use when that faux leather or woven liner starts falling off the cabin top? The best solution may be no glue at all.

When a cruising sailor starts thinking about exploring fjords and glaciers, he starts putting a little more thought into his boat’s diesel engine and drivetrain components. High-latitude cruising sailor Andy O’Grady writes about several parts that has served him well in extreme conditions: the Kiwiprop, the Manecraft dripless prop shaft seal, the PRM150 transmission, and the K&N reusable air filter.

When a cruising sailor starts thinking about exploring fjords and glaciers, he starts putting a little more thought into his boat’s diesel engine and drivetrain components. High-latitude cruising sailor Andy O’Grady writes about several parts that has served him well in extreme conditions: the Kiwiprop, the Manecraft dripless prop shaft seal, the PRM150 transmission, and the K&N reusable air filter.

Noted West Coast sailor Skip Allan - fresh from "falling" off the deck of Wildflower in our harness test (December 2006) - spent several days offshore again, this time tangling with sailing safety tethers. The results were shocking. Several major retailers continue to sell safety tethers with jackline snap hooks that might disengage themselves, and one of the two child safety tethers we tested broke - twice.