Sailboat Reviews

Its hard to mistake the Stiletto 27s appearance-typically with blazing topside graphics and aircraft-style, pop-top companionway hatches. Its also hard for the average sailor to appreciate the sophistication of the Stilettos construction-epoxy-saturated fiberglass over a Nomex honeycomb core. There is probably no production hull built in the U.S. with a better strength-to-weight ratio than the Stiletto. And although the design is 40 years old, the Nomex honeycomb fabrication is still impressive.

This summer, Stiletto Manufacturing will be launching the all-new Stiletto X-Series, including a foiling catamaran, with the first boats expected to splash about the time this article went press. Carrying on the Stiletto tradition, the 10-meter X-Series models are being marketed as high-performance boats that are fast, beachable, trailerable, and affordable, as well as easy to handle and ideal for coastal family getaways.

If you grew up sailing in Florida in the 1970s and 80s as I did, you probably spent many hours daydreaming and looking at Hunters, or if you were fortunate, sailing one. Those memories might not exist at all were it not for bit of luck and perseverance. While the U.S. economy was caught in a global recession, the Hunter Marine plant in Florida was still churning out sailboat hulls by the dozens.

For better or worse, the Columbia 8.7 is modern in appearance, with a very straight sheer, pronounced forward overhang, and no overhang aft. The stern is decidedly unusual, with an exaggerated wineglass-section transom. This reduces the apparent size of the back end of the boat, which would otherwise look very ungainly since beam is carried well aft. From an aesthetic point of view, you either like the stern or you don't.

The Dragonfly 800 comes in two configurations, one for racing and one for what the company calls cruising, which is a misnomer only in that it implies a plodding demeanor, which is hardly the case. The essential difference is a taller mast and Kevlar sails for the racing model.

The EXPO Solar Sailer was conceived by Hoyt (who has a long list of conceptions to his credit), designed by Hood (who needs no introduction) and built by TPI(at present, or one time or another, the builder of J Boats, Aldens, Jeanneau catamarans and Freedoms). Put Gary Hoyt, Ted Hood and Everett Pearson in a canoe and you have the marine industry's maximum tripartite brain power. The cerebral sparks from these three New England dynamos produced the EXPO Solar Sailer.

In profile, the Island Trader 37 looks like she caught a wave on the chin. The sheer seems exaggerated, rising too high in the bow and stern. The low-aspect rig is short, carrying just 567 square feet of sail on a 30' 4" waterline. Displacement is reported anywhere from 18,600 lbs. to 26,400 Lbs. This gives the 37 an incredible displacement/length ratio of 422, and an abominable sail area/displacement ratio of 10.7, easily putting it in the "heavy" or "motorsailer" category.

This 26-footer is totally unlike familiar racer/cruisers from Pearson, Catalina or Hunter. For openers, it looks like a hot rod. The fine entry of its plumb bow and reverse transom give it a grand prix look, as does its 8' 8" beam. The boat displaces only 2,900 pounds on a 22' 0" waterline. It has a 7/8 rig supported by a pair of swept-back spreaders. Standing rigging is 3/16" wire on the uppers, forestay and lowers, 5/32" on the intermediates and running backstays. Ease of movement along wide decks is assisted by inboard shrouds.

Back in 1965, a St. Petersburg, Florida sailmaker named Charlie Morgan, who had been dabbling with custom racing yacht design and had come up with a remarkable string of winners, started producing a series of small- to medium-sized production boats. Introduced late that year, the Morgan 24 joined the Morgan 30, 34 and 38, becoming an instant success as a fast cruiser and club racer.

The Tartan 31 is one of the new line of performance cruising yachts from the venerable-and durable--Grand River, Ohio boatbuilder. In the last few years, Tartan Marine has come out with a range of new models, including the T-28, the 3500 and the 4600. A 41-footer is in the works. Both the 28 and the latest version of the 31 are part of the new Piper series, which are marketed in sailaway condition. Tartan has a reputation for solid construction and good workmanship and that's what the 31 is: solid and well put together. The hull is hand-laminated with alternating layers of chopped strand mat and unidirectional E glass. Behind the NPG/ISO gelcoat there's a layer of vinylester resin, which so far appears to provide the best osmotic blister protection available.