Sailboat Reviews

On most trailerable boats, when the mast is stowed for travel it is lashed to the bow pulpit and stern rail with no support at all in the middle.

Beyond the text and photos contained in a sailboat manufacturing company’s brochures, and the words of a dealer or salesperson, and absent an understanding of yacht design, discerning the actual capabilities of today’s production boats is a major task. Gone are the days of Herreschoff et. al., when the conventional wisdom held that a long, deep keel was the best method of producing good tracking, displacement produced a seakindly ride, and performance (straightforward speed) was a simple matter of adding sail area. Prior to the age of fiberglass, most yachts used similar raw materials (wood and metal), and construction methods, so those variables were not generally a consideration.

Take a cursory glance at a new 35-footer and you might easily conclude that, except for cosmetic changes, the boat is essentially unchanged from those that made their debut in 1995. But that is not the case. In contemporary designs, modifications to deck layouts, the design of creature comforts, and boathandling systems, all reflect the market's desire for easy use, as evinced by below-deck sheeting systems (X Yachts), electrically controlled stern platforms (C&C), and removable traveler systems (Etap), for instance.

Choosing an anchor best suited to your cruising style must take into account the area you are cruising, the type of boat you will be sailing, and the demands you will make on your gear. Purchasing an anchor and its chain and rode can be an expensive proposition.

Perhaps the biggest surprise during our 30,000-mile circumnavigationwas just how critical the engine is to a cruising sailboat. We motored or motorsailed almost 25 percent of the miles that passed under our keel. The engine also provided battery charging for everything from lighting to making fresh water. It drove the refrigeration system, and made hot water.

About a year ago, I read an article that warned of “the coming crash in sailboat prices.” I didn’t believe it then, and nothing has happened in the last year to make me change my mind. In fact, while no one is ready to declare that the “soft” market for new sailboats is over, there are numerous indications that sales are up, and that used boat prices are beginning an upward spiral.

Probably nothing can make or break the appearance of a fiberglass boat more quickly than the appearance of the exterior teak trim. Contrary to popular belief, teak is not a maintenance-free wood that can be safely ignored and neglected for years at a time. Though teak may not rot, it can check, warp, and look depressingly drab if not properly cared for.

When the 28’ Pearson Triton appeared on the market in 1959, a revolution began in the boatbuilding industry. Fiberglass made economical mass production of boats a reality , and helped make sailing - and boat-owning - an activity for everyman. And Everywoman.For sailors who have never known boats built of anything but fiberglass, the changes in boatbuilding that can be attributed to the prosaic laminate of glass fibers and polyester resin are hard to imagine.

At boat shows, you see clipper-bowed boats with wooden spars cheek by jowl with IOR racers with reverse transoms and straight sheerlines. Each may be attractive in its own way. Both can also be little more than caricatures. Although “style” may sound like a question of pure aesthetics, style is also a matter of function. A reverse transom on an IOR boat is there purely for rating reasons. For the owner or potential buyer of the cruiser/racer modeled in some fashion after an IOR racer, a reverse transom may be a reminder of a racing heritage.

A snug-fitting teak grating adds safety and a touch of class to the cockpit of any boat. Spray or rain runs under the grating to the cockpit drains, leaving a reasonably dry footing for hopping about the cockpit as you haul in sheets to tack or trim sails. Unfortunately, you can't buy a grating off the shelf to fit your boat, and having a grating custom-built can be a costly and nerve-wracking experience. The solution to both of these problems: build your own grating. Its a fun job that can keep you busy for a few winter evenings, and you can build it for less than one-third the cost of a custom-built job.