Sails, Rigging & Deck Gear

My affinity for cruising ketches like the Allied Seawind II we feature this month runs contrary to the view of their many detractors. Their criticism goes something like this: Ketches were popular in early days of cruising when undersized winches and friction-bound hardware conspired to make handling large sails a chore. With efficient winches and modern hardware, split rigs are obsolete on boats under 50 feet, they say.

Sailors spend considerable time pondering their anchoring arsenal for the mothership, but what about the dinghy? With the new Mantus Dinghy Anchor, it seems that all of the design schools are now represented in small sizes. We were interested to determine which of these might offer the best performance.

Each anchor was pulled in both a straight line and at 90 degrees in both soft mud and firm sand at a 10:1 scope. All findings regarding load were recorded with a calibrated load cell. Testers performed the 90-degree test by lightly setting the anchor (with a 15-pound load in mud, 40 pounds in sand) and then slowly pulling at a 90-degree angle, as though the wind or tide changed. Additionally, each anchor was used day-in, day-out aboard an inflatable dinghy to evaluate ease of use and real-world effectiveness.

The right roller-furling headsail is as beneficial to a sailor as a good zoom lens is to a photographer. But just as the zoom lens has limits, even the best furling headsail is challenged at the extreme ends of its range. In the October 2015 issue, we explored the basic sail needs of a daysailor. For this report, the second and final in our series on headsails, we asked five professional sailmakers from around the country to weigh in on the ideal sail inventory for coastal cruising.

Getting rid of the big genoa is usually easy thanks to roller furling, but what do you do then? Changing sails on the furling unit is a daunting task when short-handed, and sailboats don't power particularly well in a big sea. Heres an easy, safe, and seamanlike solution: Set your boat up with an inner forestay, and when these conditions arise, roll your big genoa up, set your forestaysail, and away you go.

Whether you view it from the top down or the bottom up, a Solent rig needs to be carefully thought out, well-engineered, and strategically located. Some sailors add a short bow sprit or U-shaped, tubular extension that includes a bobstay and supports the attachment of a new headstay. The old headstay chainplate becomes the new tack point for the Solent stay. Another approach is to retain the existing headstay and simply attach a new tang just a bit below the headstay sheave box. Then add a deck fitting to attach the Solent stay and tack the sail(s). The deck must be reinforced with a transverse member, or a tie rod must be mechanically fastened to the stem so that the tension loads don't damage the deck.

Headsail furling on sailboats 40 feet and shorter should be able to be accomplished with a hand-over-hand pull on the furling line. If a large genoa is set and the breeze fills in abruptly, it may take a little coaxing with a winch to get things going, but when its a fairly light-wind day and you need to start cranking away on a primary winch to instigate the furl, something is wrong with the system.

The used boat review of the Tartan 37 in the January 2015 issue mentioned that several companies specialize in producing bullet-proof companionway door arrangements that can be customized to fit almost any boat. I would like the names of such companies in the U.S. as I am looking for ways to improve my boats current companionway arrangement.

Each fall, Practical Sailor editors sort through the best test products of the past year to pick those deserving of a spot on our PS Editors Choice roster. To be named to the list, products must earn the Best Choice rating among their respective peers and clearly stand out above others in their field.

Our Editors Choice roster would not be complete without the top performers in our semiannual bottom paints tests (PS October 2014 and April 2015). The most recent test looked at 55 different paints from Blue Water Paints, Interlux, Epaint, Pettit, and Sea Hawk. This years hard paint standouts were Interluxs Micron Extra with Biolux and West Marines Bottomshield. Made by Pettit, the West Marine-branded PCA Gold was the top ablative paint. Micron Extra and PCA Gold tied for best performance of the bunch.