Repair, Tools & Materials

Stopping Centerboard Pin Corrosion

I'm trying to determine the cause of erosion of the centerboard pivot pin from Arcturus, our 36-foot Soverel keel/centerboard cutter. It is a 2-inch...

2017 Top Sailing Gear

Scott Rapid Dissolve Toilet PaperFollowing a carefully considered protocol that is not worth delving into here, testers took a second look at toilet paper...

The Best Respirators for the Boatyard

Although falling off a ladder or cutting yourself with a sharp tool are the most common boatyard injuries, damage from the foul air we...

DIY Fairing and Filling

Epoxy deserves its wonder resin status as a highly adhesive, water-resistant laminating resin. It is the secret sauce behind a shelf full of fillers,...

Esoteric Fibers Call for Epoxy

Theres little debate over the adhesive quality and toughness of epoxy resin-just look at where its being used. We hear about its presence in...

Descaling Solutions for Boats

In addition to all of that lovely salt, seawater is very hard, nearly saturated with calcium. All it needs is something to react with...

What’s the Best Anode Material?

Every fall, as the hauled-out boats are sardined into boatyards, a walking tour reveals the casualties from the underwater war. Saildrives are deeply pitted...

PS Tests Adhesive Removers

Many years ago, one of our editors had an old wooden boat with lovely wooden handrails just inside the companionway that his sailing partner...

Durabak Nonskid Coating Long-term Test Update

In the January 2012 issue, we evaluated the application ease and traction performance of do-it-yourself nonskid options. A few months prior to the report,...

Marine Sealant Adhesion Tests

We expect a lot from adhesive sealants for the marine environment. They must stick to a wide variety of surfaces, including gelcoat, aluminum, wood,...

Bavaria C42: What You Should Know | Boat Tour

Looking to buy a 40-45 foot sailboat? Considering a Bavaria C42? See a Bavaria 42 for sale? What are the pros and cons of...