Stop That Leak!
The trick is to choose the right one. Some sealants get hard enough to sand or drill, and others stay supple. Some will stick...
Boat Clinic: Minor Repair to Cored Decks
As long as the areas are small-no more than one or two square feet-repairs are quite simple and can usually be accomplished by injecting...
Wood Ash Absorbs Odors Best
The media serves several purposes in a desiccating toilet. It provides visual cover, draws moisture away from the solids (good wicking and coating are...
Caulking Gun Shootout
Caulking guns might seem like simple implements— lever, a spring, a notched shaft, and a few extra flourishes and what was once a slab...
Non-Skid Ten Years After
Boat decks take a beating from sun and salt that eventually take their toll on factory-molded nonskid. Once nonskid loses its grip, resurrecting it...
Making Your Own Workshop Filter
It all started when I needed to make a number of large cuts inside the house and outside of the confines of my shop....
Are Boatbuilders Expecting Miracle Glues?
Don’t ask an adhesive to do more than it can. If a bolt breaks, we accept it as deterioration or faulty design, not a...
Shock Cord Hardware for Sailors
Every rope we have on board has its quirks when you’re trying to form a knot that won’t slip or come untied.
Dyneema is a...
Bungee Lanyards Take the Shock Out of Tools Dropped from the Mast
Iput a nice dent in the deck several decades ago when I dropped a wrench from the masthead. It scared the crew too.
I haven’t...