Sailboat Reviews

The F-31 presents an aesthetically pleasing design with its fine entry; low, 27-inch freeboard; and fine lines. A flat aft section prevents the stern from burying when the bow rises in heavier breezes. Even when sailed on a broad reach with the windward ama out of the water, Farrier believes that his multis are more comfortable than a monohull sailed at a comparable angle of heel. Owners agree that being able to launch from a beach, or sail into a shallow anchorage, adds to the boat's overall utility and their enjoyment of the sport.

This is a conservative boat, devoid of construction razzmatazz. The hull is an uncored, solid laminate. For those living in colder climates and wanting more insulation, the boat can be built with either foam or balsa core, but these are added to the normal hull layup, resulting in a somewhat heavier boat with slightly reduced interior volume.

The CSY 37, designed by Peter Schmitt, is the mid-sized boat In the CSY line. Primarily designed for the Caribbean bareboat charter trade, 87 of the raised-deck cutters were built. Schmitt has combined some features most often found in "traditional" boats the oval stem, raised deck, and semi-clipper bow with a relatively modern underbody featuring a fairly long fin keel and a skeg-mounted rudder. On paper, the boat looks pretty good. In person, she is rather tubby and high-sided.

There is no doubt about the Deerfoot 61's purpose in life. This boat is made for long-distance cruising. "We'd sailed thousands of miles on a 50' foot CCA-designed ketch and like most liveaboards we dreamed of the perfect yacht," says Steve Dashew, author of the Offshore Cruising Encyclopedia. "We never realized this dream would end in a boatbuilding business."

The Endeavour 32 began life back in 1970 as the Irwin 32. Ted Irwin designed her as a dual-purpose cruiser-racer before the development of the IOR. By 1975, the IOR was in full swing, and boats such as the Irwin 32 were obsolete as racers, since PHRF had not yet emerged to help handicap non-competitive boats raced at the club level. Although the Irwin 32 and the Endeavour 32 look identical and have the same displacement, the Endeavour 32 is listed by the builder as being 4" wider, 4" longer overall, and 6" longer on the waterline.

Rob Valdez and John Brooks founded Endeavour in 1974 using the molds from Ted Irwin's 32-footer to launch the business. The company built about 600 32s in all. Spurred by this success, Valdez and Brooks began looking around for a larger sistership to expand the line. Just how they "developed" the 37 is a tale best left untold until the principals pass away or become too senile to read the yachting periodicals. Brooks calls the 37 a "house design," and that is generous. The total number of Endeavour 37s built is 476 a lot for a boat that size.

Ericson Yachts has gotten a lot of mileage out of 35-footers over the years. In 1965, the first Ericson 35 was a typical CCA cruising boat; in 1969, the Ericson 35-2 was introduced--an up-to-date racer/cruiser, with swept-back moderate fin keel, pronounced bustle, and semi-balanced shallow spade rudder. In 1982 it was replaced by the 35-3, a larger, more modern boat.

In the mid-1970 Dutchman Willem Eickholt, part owner at the time of Flying Dutchman Yachts, decided to build his dreamboat. A lifelong sailor, he knew he wanted an aft-cockpit, flush-decked cutter of moderate displacement and minimum wetted surface with a fin keel, skeg rudder, canoe stern, and clipper bow. "I also wanted her to be fast. Long passages bore me," says Eickholt. "Last but not least, I wanted her to be pretty in a timeless way."

In 1972 Garry Hoyt set about developing the original Freedom 40. Discarding conventions one by one, he came up with a long-waterline, quasi-traditional hull form and a wishbone cat-ketch rig. In the intervening years Hoyt refined his rig and developed a whole line of boats: a 21, 25, 28, 39 (express and pilothouse models), and the 44. The Freedom 33 is no longer in production, having been replaced in the line by the 32, which is a single masted "cat sloop" with a self tacking jib and gun mount spinnaker. More rig innovation.

Freedom Yachts were the invention of Garry Hoyt back in the early 1970s. An advertising executive and champion one-design sailor, Hoyt reached a stage in his life when he wanted a cruising boat, but he found the existing fleet ordinary and unsatisfactory. So the story goes he set about designing himself a boat. The result was the Freedom 40, an unusual-looking cruiser with a long waterline, conventional hull, and a peculiar wishbone cat-ketch rig.