There are more cost-effective ways to combat on-board corrosion.
Cleaner than coil and grease coatings, these bags protect areas that are hard to reach. Additionally, the protective coating does not need to be removed, since it is very thin and will slowly evaporate once the part is removed from the bag.
To continue reading this article, you must be a paid subscriber.
Subscribe to Practical Sailor today and save 42%.
Here's what you'll get:
Immediate access to this article.
Access to more than 2,000 Practical Sailor articles like this.
Each new monthly issue delivered to you.
Recommendations of the best electronics for your boat.
Money- and hassle-saving tips for finding your dream boat.
Help installing new equipment and gear so you'll get it done right the first time!
Ratings on the newest paints, coatings and materials to keep your boat ship-shape.
Your satisfaction to Practical Sailor is guaranteed. Subscribe today to see why hundreds of thousands of sailors trust us as their #1 source of boating information.
Subscriber Log In
Forgot your password? Click Here. Already subscribed but haven't registered for all the benefits of the website? Click here.
Instead of fixing or replacing tired mechanical equipment with new gear, we can often find a less-expensive substitute on the used-gear market. In many cases, this is equipment that is just as good as new gear, if not better than new. The trick is separating the gems from the junk. A poster child for this sort of refit quandary is the old Simpson Lawrence manual windlass, a British-engineered oddity that has long been a source of cruising sailor ire. Commonly found on cruising boats made in the 1980s, these windlasses use a troublesome chain drive rather than a gear drive. This, along with the dissimilar metals used in its various components (cast-steel gypsy, aluminum case, etc.), make these windlasses a poor candidate for rebuilding.