Boat Maintenance

If youre going to sail youll be doing some stitching. No two ways about it. Dont jump into the $100 do-everything kit. Start with a modest kit, adding tools and materials only as your skills grow and projects require them. You already have most of what you need in your other supply lockers or tool boxes. Study a good book on sail and canvas repair, concoct a few small projects for practice.

Regarding your recent blog post on the future of wood on boats (see Farewell to the Wood-trimmed Boat? Inside Practical Sailor blog), my last boat was a beautiful, cold-molded (West System) custom 26-footer designed by Gary Mull. It was built by the very talented late Jim McClelland of McClelland Boatworks in Kenora, Ontario.

Two different harbors suffered almost the same fate as Hurricane Irma raked South Florida with hurricane force winds. In both places, tens of thousands of dollars in damage might have been prevented had the owners of large vessels better secured their boats.

Our recent test of caulk removers, (PS Tests Caulk Removers, Practical Sailor, January 2017), focused primarily on silicone caulk remover because these caulks can leave a residue that makes it impossible for anything to bond. After that test, we got a call from reps at Debond who explained that their product, although effective with silicone, is formulated to break the bond between to break the bond between 3M 5200 and a smooth gel coat surface. This is a common challenge for sailors who must disassemble through-hulls, remove chainplates, or repair structural components. So we went back to the lab to find the best antidote to 5200, and we present the results of our tests here.

The cost of masthead tricolor navigation lights, a safety improvement many sailors add to their boats, involves expense beyond the fixture itself such as a switch on the DC panel, additional wire to snake from the panel to the masthead, through-deck fitting, and labor.

A respirator can't protect you if it doesn't fit your face. Its that simple. Anything that prevents a good seal-whether facial hair or a hollow under the side of your jaw-is unacceptable. In a workplace this fit test will be performed in a very rigid manner by a trained technician. However, for the sailor/occasional boat yard worker, we offer this shortcut procedure that is far better than nothing.

Each year, just prior to the fall boat show season, Practical Sailor editors consult with our testers to come up with a select list of Gear of the Year from the previous 12 months of testing. For most of the 2016-2017 testing season we focused on essential everyday products that owners of boats of all sizes-with a few exceptions-rely on. While our testers appreciate new technology, they recognize that a safe passage often depends on the reliability of the weakest link, and that weakest link is often a seemingly minor component that gets little attention. In short, our Editors Choice list is not the sexiest product roundup, but if youre serious about keeping your electrical connections corrosion free, making professional repairs on a blue-collar budget, maintaining a safe speed in a steep following sea, or looking for a way to manage a big genoa without upgrading to an electric winch, youll appreciate it.

Athough falling off a ladder or cutting yourself with a sharp tool are the most common boatyard injuries, damage from the foul air we breathe is more insidious. Marine paints contain solvents that can make you dizzy at best or increase cancer risk at worst. Dust from sanding wood is usually only a nuisance, but sanding bottom paint or grinding fiberglass presents serious health risks. Fortunately, theres a wealth of industrial experience with contaminated air…

Sooner or later, chafe, UV rays, and sharp edges take their toll on our canvas. A misplaced screw or simple friction will eat holes in a dodger. A seam gives up, a boom rubs through the fabric, and a few snaps come loose.

I honestly hope you can help. Several weeks ago local seagulls had a sushi feast on my boat. The leftovers were large and small and mostly on non-skid. When I got to the boat I cleaned up whatever I could pick up, but the sun-baked stains remained. Ive tried whatever I possibly could including Barkeepers Friend and Total Boat White Knight. They both have oxalic acid as main ingredient. It stayed there for 30-40 minutes, I didnt touch it. Next I got oxalic acid as powder and made my own very strong mix. Again, no major effect. Next, In desperation, I broke out 3000 PSI power washer, which again didnt remove the stains. My marine biologist friend said to try Draino.